VROOM 4T 10W-30 API SN JASO MA2 – Modern 4T Motorcycle Oil
-
10W-30 API SN
-
JASO MA2
-
Modern
-
4T Motorcycle oil
-
600ml, 900ml
1 Ltr
20 Ltr
50 Ltr
210 Ltr
VROOM 4T
VROOM 4T 10W-30 is a motorcycle engine oil formulated using Smart Lube Tech for modern 4-stroke fuel-injected petrol engines. Supports controlled lubrication behaviour and stable engine operation during regular riding conditions.
The 10W-30 viscosity grade provides excellent cold-start protection and improved fuel efficiency — ideal for modern motorcycles requiring newer lubrication standards and consistent everyday performance.
Meets API SN and JASO MA2 standards — ideal for modern fuel-injected (FI) motorcycles from Hero, Honda, Bajaj and TVS requiring low-viscosity engine oil.
- Suitable for modern fuel-injected motorcycles (125cc–160cc)
- Recommended for Hero Splendor+ i3S, Glamour FI, Xtreme 125R
- Ideal for Honda SP125, CB Shine SP, CB Unicorn 160
- Compatible with Bajaj Pulsar 125 FI, Platina 110 H-Gear
- Suitable for TVS Raider 125, Apache RTR 160 FI
- Designed for fuel-injected modern engines (FI bikes needing low-viscosity oil)
- Compatible with modern wet clutch systems (JASO MA2)
-
Controlled Oil Distribution — Smart Lube Tech enables precise, controlled oil distribution to all engine components, maximising lubrication efficiency at every RPM.
-
Modern Engine Architecture Support — Specially developed for modern fuel-injected engine designs including variable valve timing systems for accurate performance.
-
Lubrication Balance — Maintains lubrication balance across varying loads — from city stop-go to highway cruising — for consistent engine protection at all times.
-
Fast Cold-Start Protection — 10W-30 low-viscosity grade ensures rapid oil flow at cold start, protecting engine components from wear during the critical first few seconds.
-
API SN JASO MA2 for FI Bikes — 10W-30 low-viscosity oil for modern fuel-injected API SN motorcycles — better fuel economy and cold-start protection than 20W-40.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 10W-30 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 10.0–11.5 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 130 |
| Pour Point | ASTM D97 | -20°C (max) |
| Flash Point | ASTM D92 | ≥ 205°C |
| TBN | ASTM D2896 | 7.5–9.0 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.858–0.868 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
