HYPER RIDE 10W-50 API SN JASO MA2 – Fully Synthetic High-Viscosity 4T Oil
-
10W-50 API SN
-
JASO MA2
-
Fully Synthetic
-
High Visco. Oil
-
900 ml
1 Ltr
20 Ltr
50 Ltr
210 Ltr
HYPER RIDE
Powerex HYPER RIDE 10W-50 API SN JASO MA2 is a fully synthetic high-viscosity motorcycle engine oil formulated for high-capacity 4-stroke petrol engines operating under demanding riding conditions. The formulation is designed to maintain strong oil film behaviour at elevated operating stress and support continuous lubrication during high-speed and high-load usage.
Powered by Extreme Film Tech, HYPER RIDE supports oil strength at high heat and helps maintain lubrication stability during aggressive riding, long rides and sustained high RPM operation. Its 10W-50 API SN JASO MA2 specification makes it suitable for performance motorcycles where high-viscosity 4T oil, wet clutch compatibility and dependable engine protection are required.
HYPER RIDE is suitable for riders looking for a premium fully synthetic 10W-50 motorcycle engine oil for performance bikes, high-temperature riding and demanding 4T petrol motorcycle applications.
- Suitable for high-capacity 4-stroke petrol motorcycles requiring 10W-50 API SN JASO MA2 engine oil.
- Suitable for performance bikes and wet clutch motorcycles where high-viscosity 4T oil is recommended.
- Can be used in selected premium motorcycles from brands such as KTM, Yamaha, Bajaj, Honda, Suzuki and TVS where 10W-50 grade oil is specified.
- Designed for high-heat, high-speed and demanding riding conditions.
- Suitable for long rides, aggressive riding and sustained high RPM operation.
- Ideal for riders looking for fully synthetic high-viscosity motorcycle engine oil.
-
High Heat — Maintains oil thickness at elevated engine operating temperatures.
-
Race RPM — Supports sustained high RPM operation during demanding riding.
-
Wide Range — Maintains lubrication behaviour across wide speed conditions.
-
Extreme Film Strength — Helps protect engine parts during aggressive riding and high-load usage.
-
SN Performance Support — Designed for API SN grade performance motorcycles.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 10W-50 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 16.5–19.5 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 150 |
| Pour Point | ASTM D97 | -30°C (max) |
| Flash Point | ASTM D92 | ≥ 220°C |
| TBN | ASTM D2896 | 7.5–9.0 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.860–0.880 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
