TRUNK-X 20W-50 API SN JASO MA2 – High Viscosity Bike Engine Oil
-
20W-50 API SN
-
JASO MA2
-
High Viscosity
-
Bike Engine oil
-
900 ml
1 Ltr
20 Ltr
50 Ltr
210 Ltr
TRUNK-X
Powerex TRUNK-X 20W-50 API SN JASO MA2 is a high-viscosity bike engine oil formulated for 4-stroke petrol motorcycles operating under demanding riding conditions. The oil is designed to maintain a durable lubricating layer that supports engine operation during extended use and higher operating temperatures.
Powered by X-Film Armor Tech, TRUNK-X supports strong oil film behaviour and helps maintain lubrication stability during long rides, higher heat conditions and routine motorcycle use. Its 20W-50 API SN JASO MA2 specification makes it suitable for bikes where high-viscosity engine oil, wet clutch compatibility and dependable 4T lubrication are recommended.
TRUNK-X is suitable for riders looking for a reliable 20W-50 high-viscosity motorcycle engine oil for petrol bikes used in daily rides, highway runs and extended riding cycles.
- Suitable for 4-stroke petrol motorcycles requiring 20W-50 API SN JASO MA2 engine oil.
- Suitable for wet clutch motorcycles where JASO MA2 compatibility is recommended.
- Can be used in selected commuter, cruiser and high-heat running motorcycles where 20W-50 API SN oil is specified by the vehicle manufacturer.
- Designed for long ride cycles, higher operating temperatures and sustained motorcycle use.
- Suitable for bikes operating under demanding riding, load and heat conditions.
- Ideal for riders looking for strong oil film support in regular and extended riding use.
-
TorqueUp — Supports strong oil film behaviour during regular riding and load conditions.
-
FilmSafe — Maintains lubricating layer under engine heat and extended use.
-
RidePlus — Performs during long ride cycles and sustained motorcycle operation.
-
Noise Feel Control — Helps reduce engine noise feel by supporting stable oil film strength.
-
SN Grade Support — Suitable for motorcycles requiring API SN grade 20W-50 engine oil.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 20W-50 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 17.5–20.5 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 125 |
| Pour Point | ASTM D97 | -21°C (max) |
| Flash Point | ASTM D92 | ≥ 220°C |
| TBN | ASTM D2896 | 7.5–9.0 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.875–0.890 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
