NITROX 20W-50 API SL JASO MA2 – CNG / Petrol Engine Oil
-
20W-50 API SL
-
JASO MA2
-
CNG / Petrol
-
Engine oil
-
500 ml, 900 ml
1 Ltr, 3Ltr
3.5 Ltr, 5 Ltr
10 Ltr, 15 Ltr
50 Ltr, 210 Ltr
NITROX
NITROX 20W-50 is a general-purpose engine oil for petrol and CNG-powered engines, including motorcycles and passenger cars. The Multi Engine Guard Tech provides consistent lubrication across varied conditions.
Particularly effective in CNG-converted vehicles where higher combustion temperatures demand enhanced oil film strength.
Meets API SL and JASO MA2 — a versatile solution for CNG bikes, CNG cars and petrol motorcycles.
- Suitable for petrol and CNG motorcycles and passenger cars
- Recommended for CNG-converted bikes, scooters and three-wheelers
- Ideal for Honda Activa CNG, TVS Jupiter CNG variant
- Compatible with CNG passenger cars (Maruti, Hyundai, Tata)
- Suitable for CNG auto-rickshaws
- Designed for engines operating on gas fuel (higher combustion temperature)
- Multi-purpose — compatible with both bike and car engines (JASO MA2)
-
Gas-Fuel Engine Compatible — Multi Engine Guard Tech formulation is optimised for CNG and petrol-fuelled engines in gas-powered applications.
-
Elevated Temperature Management — Helps manage higher engine temperatures characteristic of CNG combustion, preventing oil degradation under heat.
-
CNG Combustion Lubrication — Maintains protective oil film under dry combustion conditions typical of CNG engines, where fuel provides less natural lubrication.
-
Multi-Engine Versatility — One oil for both motorcycles and passenger cars — compatible with JASO MA2 bike engines and petrol/CNG car engines.
-
API SL JASO MA2 CNG + Petrol — Multi-purpose API SL JASO MA2 oil — the go-to solution for CNG vehicle owners needing one oil for all vehicles.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 20W-50 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 18.0–20.0 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 95 |
| Pour Point | ASTM D97 | -12°C (max) |
| Flash Point | ASTM D92 | ≥ 220°C |
| TBN | ASTM D2896 | 7.0–8.5 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.2% mass |
| Density @ 15°C | ASTM D4052 | 0.870–0.880 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
