REVAULT 10W-40 API SN – Advanced Synthetic Engine Oil
-
10W-40
-
API SN
-
Advanced Semi. syn.
-
Engine Oil
-
1 Ltr, 2.5 Ltr
3 Ltr, 3.5 Ltr
4.5 Ltr, 5 Ltr
20 Ltr, 50 Ltr
210 Ltr
REVAULT
Powerex REVAULT 10W-40 API SN is an advanced synthetic engine oil developed for petrol passenger car engines operating across varied driving conditions. The formulation is designed to support viscosity consistency during regular city driving, highway use and higher-speed engine operation.
Built with Vault Core Tech, REVAULT helps maintain balanced oil behaviour, smooth engine response and consistent lubrication performance during extended use. Its 10W-40 API SN specification makes it suitable for petrol cars where reliable engine oil performance, speed-use stability and daily driving protection are required.
REVAULT is suitable for car owners, service centres and workshops looking for a dependable 10W-40 API SN passenger car engine oil for petrol vehicles used in routine maintenance, city commuting and highway driving.
- Suitable for petrol passenger cars requiring 10W-40 API SN engine oil.
- Suitable for vehicles where 10W-40 petrol car engine oil is recommended by the vehicle manufacturer.
- Can be used in selected petrol cars from brands such as Maruti Suzuki, Hyundai, Honda, Toyota, Tata, Mahindra and Renault where 10W-40 API SN oil is specified.
- Designed for regular city driving, highway use and mixed driving conditions.
- Suitable for engines requiring balanced oil stability during higher-speed operation.
- Ideal for workshops handling petrol passenger car oil change requirements.
-
RPM Care — Supports oil stability during higher engine speed conditions.
-
Seal Safe — Assists balanced lubrication behaviour for regular petrol car engines.
-
Speed Use — Performs during varied city and highway driving conditions.
-
Balanced Oil Control — Maintains operational consistency during extended driving use.
-
API SN Support — Suitable for petrol vehicles requiring 10W-40 API SN engine oil.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 10W-40 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 14.0–16.0 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 140 |
| Pour Point | ASTM D97 | -27°C (max) |
| Flash Point | ASTM D92 | ≥ 210°C |
| TBN | ASTM D2896 | 7.0–8.5 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.860–0.875 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
