DRIVETEC 5W-40 API SN / CF – Synthetic Diesel Car Engine Oil
-
5W-40
-
API SN / CF
-
Synthetic Diesel
-
Car Engine oil
-
1 Ltr, 2.5 Ltr
3 Ltr, 3.5 Ltr
4.5 Ltr, 5 Ltr
20 Ltr, 50 Ltr
210 Ltr
DRIVETEC
Powerex DRIVETEC 5W-40 API SN / CF is a synthetic diesel car engine oil formulated for modern diesel passenger car engines operating under regular city, highway and mixed driving conditions. The oil is designed to support stable lubrication performance under higher combustion loads typically seen in diesel engine operation.
Built with Dura-Diesel Synth Tech, DRIVETEC helps manage soot-related stress, maintain oil integrity at operating temperatures and support smooth engine response during daily driving. Its 5W-40 API SN / CF specification makes it suitable for diesel passenger cars where synthetic lubrication, heat stability and dependable engine oil performance are recommended.
DRIVETEC is suitable for car owners, workshops and fleet users looking for a reliable 5W-40 synthetic diesel car engine oil for routine service maintenance, highway running and regular passenger car use.
- Suitable for diesel passenger cars requiring 5W-40 API SN / CF engine oil.
- Suitable for modern diesel car engines where synthetic 5W-40 oil is recommended by the vehicle manufacturer.
- Can be used in selected diesel passenger cars from brands such as Hyundai, Tata, Mahindra, Toyota, Honda, Maruti Suzuki, Skoda and Volkswagen where 5W-40 API SN / CF oil is specified.
- Designed for city driving, highway running and regular service maintenance.
- Suitable for diesel engines requiring stable oil performance under combustion load and operating heat.
- Ideal for workshops handling diesel passenger car oil change requirements.
-
PullDrive — Supports stable lubrication under diesel combustion loads.
-
WearLock — Helps maintain oil integrity at higher operating temperatures.
-
FuelGain — Assists smooth engine response during regular diesel car use.
-
Soot Stress Control — Helps manage soot-related stress in diesel passenger car engines.
-
SN / CF Support — Suitable for diesel car engines requiring 5W-40 API SN / CF performance.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 5W-40 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 13.0–15.5 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 155 |
| Pour Point | ASTM D97 | -36°C (max) |
| Flash Point | ASTM D92 | ≥ 215°C |
| TBN | ASTM D2896 | 7.0–9.0 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.855–0.870 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
