RACE-ON 5W-30 API SN / CF – Fully Synthetic Engine Oil
-
5W-30 API
-
SN / CF
-
Fully Synthetic
-
Engine oil
-
600 ml, 1Ltr
3 Ltr, 3.5 Ltr
4.5 Ltr, 5 Ltr
7.5 Ltr, 20 Ltr
50 Ltr, 210 Ltr
RACE-ON
Powerex RACE-ON 5W-30 API SN / CF is a fully synthetic engine oil formulated for modern passenger car engines operating under varied driving conditions. The oil is designed to enable quick lubrication during engine start-up and support smooth engine operation during daily city and highway driving.
Built with Race Flow Car Tech, RACE-ON supports fast oil flow at start-up, stable viscosity behaviour and consistent lubrication performance during regular driving cycles. Its 5W-30 API SN / CF specification makes it suitable for petrol, CNG and compatible diesel passenger cars where low-viscosity fully synthetic engine oil is recommended.
RACE-ON is suitable for car owners, workshops and fleet users looking for a reliable 5W-30 fully synthetic passenger car engine oil for daily driving, cold start support and regular service maintenance.
- Suitable for passenger cars requiring 5W-30 API SN / CF engine oil.
- Suitable for modern petrol and CNG car engines where 5W-30 grade oil is recommended by the vehicle manufacturer.
- Can be used in selected diesel passenger cars where API CF compatibility and 5W-30 viscosity grade are specified.
- Designed for daily city driving, highway use and regular service maintenance.
- Suitable for vehicles requiring fast oil flow during start-up and stable lubrication during regular driving.
- Ideal for workshops handling passenger car oil change requirements across petrol, CNG and compatible diesel applications.
-
Cold Flow — Supports quick oil circulation during engine start-up.
-
Fuel Save — Assists smooth engine operation and efficient daily driving.
-
Daily Run — Operates across regular city and highway driving conditions.
-
Viscosity Control — Maintains stable viscosity behaviour during daily use.
-
SN / CF Support — Suitable for petrol, CNG and compatible diesel car applications where this grade is recommended.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 5W-30 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 10.0–12.0 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 150 |
| Pour Point | ASTM D97 | -33°C (max) |
| Flash Point | ASTM D92 | ≥ 210°C |
| TBN | ASTM D2896 | 7.0–8.5 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.0% mass |
| Density @ 15°C | ASTM D4052 | 0.850–0.865 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
