STALLON 20W-40 API CF-4 – Commercial Grade Diesel Oil
-
20W-40
-
API CF-4
-
Commercial Grade
-
Diesel oil
-
1 Ltr, 3Ltr
3.5 Ltr, 5 Ltr
7.5 Ltr, 8 Ltr
10,15 & 20 Ltr
50 Ltr, 210 Ltr
STALLON
Powerex STALLON 20W-40 API CF-4 is a commercial grade diesel engine oil formulated for commercial vehicles, agricultural equipment and diesel engines operating in demanding working environments. The oil is designed to support steady lubrication performance and help maintain consistent engine behaviour during prolonged operation.
Built with Power Bond Diesel Tech, STALLON supports diesel engine lubrication under regular working loads, field operation and transportation use. Its 20W-40 API CF-4 specification makes it suitable for diesel engines where dependable oil behaviour, load support and regular service performance are required.
STALLON is suitable for transport operators, tractor users, workshops and fleet maintenance teams looking for a practical 20W-40 CF-4 diesel engine oil for trucks, tractors, commercial vehicles and diesel equipment.
- Suitable for diesel engines requiring 20W-40 API CF-4 engine oil.
- Suitable for commercial vehicles, tractors and agricultural diesel equipment where 20W-40 CF-4 oil is recommended by the manufacturer.
- Can be used in selected trucks, buses, tractors, utility vehicles and diesel machinery operating under regular service conditions.
- Designed for transportation, field work, farm operation and commercial diesel engine use.
- Suitable for engines operating under regular load, prolonged working hours and mixed duty cycles.
- Ideal for workshops, fleet owners and agricultural users handling diesel engine oil change requirements.
-
Worksite — Supports diesel engine lubrication in regular commercial working environments.
-
Torque Aid — Assists mechanical surface movement under diesel engine load conditions.
-
Field Run — Performs during transport, agriculture and field operating cycles.
-
Consistent Oil Behaviour — Maintains lubrication layer integrity during prolonged operation.
-
CF-4 Diesel Support — Suitable for diesel engines requiring 20W-40 API CF-4 engine oil.
| Test Parameters | Method | Results |
|---|---|---|
| Grade | SAE J300 | 20W-40 |
| Kinematic Viscosity @ 100°C | ASTM D445 | 14.5–16.5 cSt |
| Viscosity Index (VI) | ASTM D2270 | ≥ 115 |
| Pour Point | ASTM D97 | -18°C (max) |
| Flash Point | ASTM D92 | ≥ 215°C |
| TBN | ASTM D2896 | 8.0–10.0 mg KOH/g |
| Sulphated Ash | ASTM D874 | ≤ 1.3% mass |
| Density @ 15°C | ASTM D4052 | 0.875–0.895 g/cm³ |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
