COOLANT 1:4 IAT – Concentrated Engine Coolant
-
1:4
-
IAT
-
Engine Cooline
-
System Coolant
-
500 ml, 1Ltr
3.5 Ltr, 5 Ltr
10Ltr, 20Ltr
50 Ltr, 210 Ltr
COOLANT
Powerex COOLANT 1:4 IAT is a concentrated engine coolant formulated for automotive and industrial cooling systems where conventional inhibited coolant performance is required. The coolant is designed to be diluted with clean demineralised water in the recommended 1:4 ratio before use.
Built with INSTA COOL TECH, COOLANT 1:4 IAT supports efficient heat transfer, smooth coolant circulation and corrosion protection for radiator and cooling system components. Its IAT-based inhibitor system helps protect metal surfaces commonly found in cooling circuits during regular engine operation.
COOLANT 1:4 IAT is suitable for vehicle owners, workshops, fleet users and maintenance teams looking for a dependable 1:4 concentrated radiator coolant for routine service, heat control and cooling system protection.
- Suitable for radiator and engine cooling systems requiring IAT concentrated coolant.
- Designed to be diluted in 1 part coolant concentrate with 4 parts clean demineralised water before filling.
- Suitable for selected passenger cars, two-wheelers, commercial vehicles, tractors, generators and industrial cooling systems where conventional IAT coolant is recommended.
- Can be used in routine radiator service applications where heat transfer, rust protection and cooling circuit care are required.
- Suitable for workshops and fleet maintenance teams handling regular coolant replacement requirements.
- Do not use undiluted. Do not mix with OAT, HOAT or long-life coolants unless compatibility is confirmed by the vehicle or equipment manufacturer.
-
Engine Heat Dissipation — Insta Cool Tech supports efficient engine heat dissipation after correct 1:4 dilution with water in the cooling system.
-
Cooling Circuit Protection — Assists protection of radiator, water pump, hoses and engine block from corrosion and damage.
-
Thermal Balance Maintenance — Maintains correct thermal balance in the engine cooling system for optimal operating temperature.
-
Post-Dilution Performance — Performs reliably after 1:4 dilution with clean water providing correct freeze and boil protection.
-
1:4 IAT Coolant Concentrate — 1:4 concentrate IAT coolant — economical for automotive and industrial cooling systems.
| Test Parameters | Method | Results |
|---|---|---|
| Coolant Type | Standard Observation | IAT Concentrated Engine Coolant |
| Recommended Dilution Ratio | Standard Observation | 1:4 with Demineralised Water |
| Appearance | Visual | Green, Clear Liquid |
| Specific Gravity @ 20°C | ASTM D1122 | 1.050–1.090 |
| pH of Diluted Coolant | ASTM D1287 | 8.0–10.5 |
| Boiling Point of Diluted Coolant | ASTM D1120 | ≥ 102°C |
| Freezing Protection at 1:4 Dilution | ASTM D1177 | Approx. -7°C to -10°C |
| Reserve Alkalinity | ASTM D1121 | 4.0–8.0 ml |
| Corrosion Protection | ASTM D1384 | Passes |
| Foaming Tendency | ASTM D1881 | Passes |
The values mentioned above are typical and may vary within acceptable manufacturing tolerances. Continuous product development may lead to changes without prior notice.
